LinkLube All Seasons Starter Pack

LINKLUBE WET WEATHER CHAIN LUBE

1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser
2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all)
3. Remove as much water as you can from the chain. For best results, use Peaty's PT17 Biodegradable Maintenance Spray
4. Give the bottle a good shake
5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered
6. Keep cycling the chain for 10 seconds or so to help the lube work its way into your chain
7. Thoroughly wipe away all excess lube from your chain using a clean cloth
   
   
   

LINKLUBE ALL WEATHER CHAIN LUBE

1. Fully degrease drivetrain before applying fresh lube to ensure there is no old chain oil present. For best results, use our Foaming Drivetrain Degreaser or XXX Solvent Degreaser to remove stubborn factory greases in the case of brand new chains.
2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain oil after all)
3. Remove as much water as you can from the chain. For best results, use Peaty's PT17 Biodegradable Maintenance Spray
4. Give the bottle a good shake to evenly distribute the secret sauce
5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered
6. Keep cycling the chain for 10 seconds or so to help the lube work its way into your chain
7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions).
   
   

TIPS
For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection.
On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more!

LINKLUBE DRY CHAIN LUBE

When applied for the first time, it is essential that LinkLube Dry is applied to a well degreased and dry drivetrain.
If a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening.

1. Fully degrease before applying fresh lube to ensure there is no old chain oil present. For best results use our Foaming Drivetrain Degreaser or, in the case of brand new chains, use XXX Solvent Degreaser to remove stubborn factory greases.
2. Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all).
3. Allow chain to dry thoroughly before application.
4. Apply to the inside face of the chain only. The light blue color of the chain lube allows you to see exactly where you have and haven't applied.
5. Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers.
6. Check for over-application. You can tell if you over-apply LinkLube Dry because you’ll see the lube start to fill the narrow chain links. If this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. You’ll see the lube disappear from the narrow links, leaving lube only where it’s needed on the chain.
7. Leave to fully dry so the lube goes from a light blue color to completely clear (you’re waiting for the water to evaporate, so leaving it in the sun helps). How long it takes for the water to evaporate—and for the lube to turn clear in color—depends on the weather conditions. This can range from just a few minutes (if hot) to a few hours (if cold and damp). For best results, apply the night before.
8. Ride!
   
   

CAUTION
Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.

DELIVERY
UK
FREE Shipping on all UK orders over £30.
Orders under £30 are subject to a £5 delivery charge.

Alll orders are sent via DPD Next Working Day Delivery.
Please visit our Delivery Information page for further information.

Please expect delays to processing and delivery times around peak periods, such as Christmas, Thanksgiving, Black Friday, and promotion / sales periods.
Our warehouse team work as quickly as they can to pick and pack your orders, and you will be contacted if there's a longer than expected delay. Please get in touch if you have any queries regarding your order.

EU and Worldwide
EU and worldwide shipping is now available.
Please visit our Delivery Information page for further information on all shipping times, free shipping values and delivery charges.

RETURNS
If you are unhappy with your purchase, you have 30 days to return your items to us.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Please ensure they are packaged appropriately to avoid damage during transit.
Please note, customers are accountable for return shipping charges. We suggest using a recorded or signed for delivery service to ensure the parcel is tracked and insured. All parcels are the customer’s responsibility until we receive them.

For further information, please visit our Refund Policy page.

FURTHER QUESTIONS?
Check out our FAQs for answers to common questions, or Contact Us for more.