IT'S YOUR RIDE,
JUST BETTER
PRODUCT INFORMATION
MK2, WHAT's NEW?
Still made from lightweight anodised 7075 aluminium as standard, our new MK2 tubeless valves are now compatible with all rim inserts and come with a spoke key cap as well as a valve core removal cap.
That's right ... the best just got even better!
INSERT COMPATIBLE BASE
The addition of a unique four-way x-cut base to enables our valves to now work with all tyre inserts.
The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them.
Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used.
All of this with no added weight!
SPOKE KEY CAP
Our MK2 valves now come with a world-first spoke key presta valve cap!
The spoke key is sized for standard 3.4mm spoke nipples and is the perfect tool for tightening loose spokes in trailside emergencies.
To use, simply unscrew the cap, slot your spoke through the gap in the top of the cap and slide down the spoke until the cap fits over your spoke nipple.
Not sure how to true a wheel? Here's a how-to from Santa Cruz Syndicate Mechanic Jedi Tom Duncan
VALVE CORE REMOVER CAP
Whether you're in the workshop or out on the trail, our valve core remover caps help to quickly remove the valve core to deflate the tyre or top up with sealant.
To de-core the valve, all you need to do is:
- Unscrew the valve cap
- Slot the valve cap over the valve core
- Twist anticlockwise until the core can be pulled out
- Repeat in reverse to refit
BIT O'BLING
You can now mix and match the colour of your valve stem with contrasting lock rings and caps with our new Accessory Kits. Check them out here
WHAT SIZE DO I NEED?
Our MK2 valves come in 42mm, 60mm and 80mm lengths. This means that whatever the depth of your rim, we have valves to fit your needs.
As a rough guide, we recommend:
- MTB, Urban and XC rims: 42mm
- Road rims: 60mm
- Deep Section Road rims: 80mm
Always measure your rims before purchasing or contact your rim manufacturer for further recommendations.
SETUP INSTRUCTIONS
FITTING INSTRUCTIONS:
- Remove the valve cap, O-ring and lock nut.
- Insert the valve through the valve hole in your rim
- Push the O-ring onto the valve stem.
- Thread the lock nut onto the valve stem.
- Hand tighten the lock nut until firm.
- Screw on the valve cap.
HOW TO DE-CORE THE VALVE:
- Unscrew the valve cap
- Slot the valve cap over the valve core
- Twist anticlockwise until the core can be pulled out
- Repeat in reverse to refit
WARRANTY
All of our valves come with the Peaty's Valves for Life guarantee, but there's a few conditions.
Valves are warranted for life to the original owner only and the warranty is limited to the replacement of tubeless valves only. Valves will be replaced like-for-like (same colour / same length).
Valves will not be warranted in the following situations:
- If they have snapped or threaded from being over-tightened.
- If they have clogged with sealant.
- If they have been intentionally broken.
- If parts have been lost.
The return process is easy - simply fill out our warranty form here and we'll get back to you asap.
Please ensure you have a photo or PDF of your proof of purchase and photos of your damaged valves ready to send us.
DELIVERIES AND RETURNS
DELIVERY
UK
FREE Shipping on all UK orders over £30.
Orders under £30 are subject to a £5 delivery charge.
Alll orders are sent via DPD Next Working Day Delivery.
Please visit our Delivery Information page for further information.
Please expect delays to processing and delivery times around peak periods, such as Christmas, Thanksgiving, Black Friday, and promotion / sales periods.
Our warehouse team work as quickly as they can to pick and pack your orders, and you will be contacted if there's a longer than expected delay. Please get in touch if you have any queries regarding your order.
EU and Worldwide
EU and worldwide shipping is now available.
Please visit our Delivery Information page for further information on all shipping times, free shipping values and delivery charges.
RETURNS
If you are unhappy with your purchase, you have 30 days to return your items to us.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Please ensure they are packaged appropriately to avoid damage during transit.
Please note, customers are accountable for return shipping charges. We suggest using a recorded or signed for delivery service to ensure the parcel is tracked and insured. All parcels are the customer’s responsibility until we receive them.
For further information, please visit our Refund Policy page.
FURTHER QUESTIONS?
Check out our FAQs for answers to common questions, or Contact Us for more.
FAQS
Are tubeless valves universal?
Peaty’s MK2 Tubeless Valves are compatible with any rim with valve holes to suit 6mm presta valves.
Do tubeless valves work with tyre inserts?
Yes. The addition of a unique four-way x-cut base to enables our MK2 valves to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves also have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. All of this with no added weight!
What size tubeless valves do I need?
We recommend there to be around 15mm of valve stem sticking out from your rim - ultimately depending on the insertion depth required by your pump head.
Which of our valve lengths will fit your rim best will depend on your specific rim and how much of a dip there is in the rim bed. Some rims also have a recessed valve hole on the inside of the rim to reduce the length of the valve required.
You can check these lengths by:
- Poking a long thin object (like a spare spoke) through your valve hole then measuring the distance from the lowest point where the valve will sit into the rim to where the valve exits the rim.
- Measure the insertion depth your pump head by pushing your existing valve into the pump then marking where the valve stem exits the base of the pump head when pushed fully inside.
- Add the first measurement to the second measurement and if this is less than 60mm then you should be fine.
If you’re still not sure then contact us and we’ll happily help you out!
Can I inject sealant through the valve stem?
We can’t speak for all types of sealant but our very own Holeshot Biofibre Tubeless Sealant can be injected directly through a de-cored valve without any issues. Simply push the 120ml trail pouch straight onto the valve stem or use the flexible injector pipe provided with our 500ml and 1L sealant packaging to inject the desired amount of sealant directly through the de-cored valve stem.
What happens if I snap a valve?
Get in touch with us through our valve warranty page and we will replace it with a new one free of charge providing you can display proof of purchase, photo of your damaged valve and a description of what happened. We’ve got your back!
Are the tubeless valves Presta or Schrader?
Peaty’s Tubeless valves are Presta valves. Presta valves are 6mm diameter whereas Schrader valves (the kind you usually see on cars) are 8mm.
How do I inflate the valves?
You can use a track pump, CO2 Tyre Inflator or air compressor to inflate your tyre through your valve.
I’m moving my valves to some new wheels but my rubbers are crushed, what do I do?
All you need here is our Tubeless Valve Service Kit to rebuild your valves like new. This kit includes two crush washers (the cone-shaped rubber bits that go on the bottom of your valve stem), two o-rings and two smoked black valve cores.
I’ve lost an o-ring from my tubeless valve, do you sell replacements?
Fear not, we sell replacement O-rings - and all other consumable parts - in our Tubeless Valve Service Kit so you can rebuild your valves like new. This kit includes two crush washers (the cone-shaped rubber bits that go on the bottom of your valve stem), two o-rings and two smoked black valve cores.
What size spoke nipple will the spoke key cap fit?
The spoke key cap is sized to fit a standard 3.4mm spoke nipple found on most mountain bikes and road bikes.
INSERT COMPATIBLE BASE
The addition of our unique x-cut base enables our valves to now work with all tyre inserts. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used.
All of this with no added weight!
VALVE CORE & SPOKE KEY CAPS
Our MK2 valves now come with both a valve core remover cap and a spoke key presta valve cap - a world first!
PEATY'S VALVES FOR LIFE GUARANTEE
If you manage to break, snap, bend or crack our valves, then we'll fix or replace them free of charge!